How to Apply Stickers

Without Mask

 
IMG_2893.jpg

Step 1. Clean the Surface

Clean the surface that you are applying the sticker to. This can be done with alcohol and/or a clean rag. Make sure all dust and debris are off the surface.

Any dirt/dust/debris that is underneath the sticker will be visible once the sticker is applied, so make sure you wipe the surface completely.

IMG_2894 sm.jpg

Step 2. Gently Place the Sticker

Gently place the sticker in the spot that you want it to be, if you press down too hard while positioning it it could make it hard or impossible to reposition the sticker.

Make sure you’re placing the sticker exactly where you want it, and positioned how you want it. Once the sticker is completely pressed down, it will become impossible to pick it back up and re-stick it.

 
 
IMG_2895 sm.jpg

Step 3. Apply

Once the sticker is where you want it, take your thumb or finger and press the sticker onto the surface, start in the middle and slowly work to each side.

For extra reassurance, run your finger along the edges of the sticker to ensure that everything is stuck down.

IMG_2896 sm.jpg

Step 4. Enjoy

Once the sticker is completely pushed down, you’re done!

 

With Mask

 

Step 1. Clean the Surface

Clean the surface that you are applying the sticker to. This can be done with alcohol and/or a clean rag. Make sure all dust and debris are off the surface.

Any dirt/dust/debris that is underneath the sticker will be visible once the sticker is applied, so make sure you wipe the surface completely.

IMG_2899 sm.jpg

Step 2. Peel Backing

Peel the clear masking paper off of the backing paper.

Make sure that the sticker is stuck to the mask and not the backing paper. If it isn’t coming up, rub the sticker with your finger on the mask surface.

 
 
IMG_2900 sm.jpg

Step 3. Gently Place the Sticker

Once the backing paper is off, position the sticker where you want to apply it.

Once you have it positioned, gently place it on the surface.

IMG_2901 sm.jpg

Step 4. Apply

Once the sticker is where you want it, take your thumb or finger and press the sticker onto the surface, start in the middle and slowly work to each side.

For extra reassurance, run your finger along the edges of the sticker to ensure that everything is stuck down.

 
 

Step 5. Remove Mask

After your sticker has been applied, gently peel the mask off.

Go slow and make sure that the sticker doesn’t start to come up with the mask.

If it does, just press the sticker onto the surface, and try again.

Step 6. Enjoy

Once the mask is removed and the sticker is completely pushed down, you’re done!

 

 
placement.png

Please Note

When applying stickers, its best to pick a surface that is relatively flat, to ensure that the application goes right.

If you’re applying the sticker to a curved surface (like a water bottle) make sure you only have 1 curve (avoid the neck).